LAUDA PRO RP 2045Cooling heating bath thermostat 230 V; 50 Hz L000092

LAUDA PRO RP 2045 Cooling heating bath thermostat 230 V; 50 Hz Features: Thermostatic bath with latest microprocessor technology. Integrated cooling system Bright and high-contrast graphic OLED display Operation with Cursor- and Softkeys 360° turnable and detachable control panel for remote control EasyUse system for simple operation of the whole unit Low-level and adjustable over-temperature protection with acoustic alarm for use with flammable and non-flammable liquids SelfCheck Assistant for system diagnosis USB and Ethernet interface equipped as standard Retrofittable for upgrading with interface (RS 232/485, Profibus; EtherCAT; analogue or contact modules) Fully electronic continuous controller with PID action for internal & external control PowerAdapt system for the use of the maximum possible amount of heat permitted by the power supply system Integrated programmer, 1 programme with max. 20 segments Low height of appliance when control panel removed Significantly enlarged accessible volume Bath vessel made of stainless steel (insulated, with handles and drain tap) Internal LAUDA Varioflex pump with 8 selectable levels SmartCool system for energy-saving digital cooling management including compressor on-off control Hybrid cooling system: (heat removal complementary with cooling water) Utilizes natural refrigerants Technical Features (according to DIN 12876): Working temperature range: -45 ... 200 °C Ambient temperature range: 5 ... 40 °C Temperature stability: 0.01 ±K Heater power max.: 2.95 kW Power consumption max.: 3 kW Power consumption: 13 A Size of bath (W x D x H): 300 x 290 x 200 mm Bath volume min. / max.: 12.5 / 21.0 L Overall dimensions (WxDxH): 400 x 565 x 680 mm Power supply: 230 V; 50 Hz Power plug: Power cord with angled plug (BS1363) Cooling Capacity (pump stages): 20 °C (8); Ethanol; 1.5 kW 10 °C (8); Ethanol; 1.43 kW 0 °C (8); Ethanol; 1.17 kW -10 °C (8); Ethanol; 0.84 kW -20 °C (4); Ethanol; 0.52 kW -30 °C (4); Ethanol; 0.28 kW -35 °C (4); Ethanol; 0.2 kW -40 °C (4); Ethanol; 0.13 kW -45 °C (4); Ethanol; 0.07 kW Standard Accessory: 1 Bath cover 2 nipples 10 mm with screw cap G3/8 for cooling water