LAUDA PRO RP 240 ECCooling heating circulator 230 V; 50 Hz L000122

LAUDA PRO RP 240 EC Cooling heating circulator 230 V; 50 Hz Features: Thermostatic circulator with latest microprocessor technology. Integrated cooling system Large 5,7" Multi-Touch-Color display Operation with multi touch display EasyUse system for simple operation of the whole unit Command console can be detached and used as remote control User administration for up to 20 user Data in- and export via USB Timer und count-down-function Low-level and adjustable over-temperature protection with acoustic alarm for use with flammable and non-flammable liquids SelfCheck Assistant for system diagnosis USB and Ethernet interface equipped as standard Retrofittable for upgrading with interface (RS 232/485, Profibus; EtherCAT; analogue or contact modules) Fully electronic continuous controller with PID action for internal & external control PowerAdapt system for the use of the maximum possible amount of heat permitted by the power supply system Programmer with up to 100 programs, up to 50 segments each Tower design with small footprint LAUDA Varioflex pump (pressure/suction) with 8 selectable levels, connections rear Low filling volume enables rapid changes in temperature Bath vessel made of stainless steel (insulated, with overflow and drain tap) SmartCool system for energy-saving digital cooling management including compressor on-off control Hybrid cooling system: (heat removal complementary with cooling water) Utilizes natural refrigerants Technical Features (according to DIN 12876): Working temperature range: -40 ... 200 °C Ambient temperature range: 5 ... 40 °C Temperature stability: 0.05 ±K Heater power max.: 2.5 kW Power consumption max.: 3 kW Power consumption: 13 A Pump Pressure max.: 0.7 bar Pump flow rate pressure max.: 22 L/min In / Outlet connection thread (outside): M16x1 In / Outlet Ø olives: 13 mm Filling volume min.: 2.4 L Filling volume max.: 4.4 L Overall dimensions (WxDxH): 300 x 430 x 675 mm Power supply: 230 V; 50 Hz Power plug: Power cord with angled plug (BS1363) Cooling Capacity (pump stages): 20 °C (8); Ethanol; 0.6 kW 10 °C (8); Ethanol; 0.6 kW 0 °C (8); Ethanol; 0.6 kW -10 °C (8); Ethanol; 0.41 kW -20 °C (4); Ethanol; 0.24 kW -30 °C (4); Ethanol; 0.12 kW -35 °C (4); Ethanol; 0.07 kW -40 °C (2); Ethanol; 0.02 kW Standard Accessory: 2 screw caps, 2 closing plugs 2 nipples 13 mm for pump connectors 2 nipples 10 mm with screw cap G3/8 for cooling water